602hp 514tq Cosworth Stroker with GT35r

[Doug@TopSpeed]

This car was built for Time Attack so I kept the boost to a max peak of 27psi with a small tapper to 26psi by redline for his high boost limit. I am very impressed with this setup for making so much power at such a "low boost". Had this car been built for drag racing I wouldn't even flinch at turning it up to 30+ psi. Even still on 23psi this car was over 540whp, which is what I would expect him to run except for the timed sessions where he can run the high boost map.

Oh yeah and this is in a lighter GC8 Chassis. :eek:



Its a full Cosworth Stroker motor with a Custom GT35r using a Tial .63ar hotside. It would have spooled faster but on this car the AVCS is not enabled so the spool and tq is a bit down. I would expect to see a 500-600rpm faster spool once th AVCS is working which would just be crazy.

I am continually amazed by these Tial Housings, time and time again they have shown to be proven winners.



Runs were made on Q16 race gas 27psi peak, tappering to 26psi at 7k with an 11.8 afr.



Mods:

Cosworth Stroker Longblock
GT35r with .63ar tial hotside
Perrin FMIC
Version 8 Intake Manifold
UEL Header
3" Turbo back Exh
Autronic SM4
1200cc injectors
Custom Fuel rails
Aeromotive FPR
Aeromotive A1000 fuel pump
ATL Fuel Cell
PPG 5spd Dogbox




http://i16.photobucket.com/albums/b4/badazzcr/Cosworth35r.jpg

[Deke]

Haha, maybe I just didn't see it, but what kind of car is it?

Nice numbers btw :)

[nsvwrx]

Oh yeah and this is in a lighter GC8 Chassis. :eek:

[dontcallitarex]

:eek3: :ddirty:

[techlord]

picture please so I know to bow down on the streets.;)

[07Ltd#767]

Was this car at the shop yesterday? If so, which one was it, the CF bodied one under the blue one on the lift?

That's just...:ohnoes:

[CoolRex]

Definately a monster....sheesh

[Doug@TopSpeed]

http://i16.photobucket.com/albums/b4/badazzcr/bart1-1.jpg

[Doug@TopSpeed]

Was this car at the shop yesterday? If so, which one was it, the CF bodied one under the blue one on the lift?

That's just...:ohnoes:


yes

[CoolRex]

Very nice looking car. I love GC8's.

[AirMax95]

Can you give any specs on the Cosworth Stroker? Is it one of their crate setups, or did you guys tweak it?

[Doug@TopSpeed]

Cosworths top dog crate storker motor complete longblock... $16k is the price of addmission though

[siegelracing]

That is the fastest Subaru I have ever been in on the street (I only drove Lucy on track)... 1st is useless at WOT, it spins all 4 at the top of 2nd and keeps them spinning when you blip the throttle (no clutch on the dog-box) and snap 3rd. It's FANTASTIC. And that was only at 23 psi of boost.

I've advised Bart that if he runs that at full boost on the cheap street tires he's got on there now, he'll die ;)

Siegel

[GTscoob]

Head/cam work? I'm guessing Cosworth heads and cams?

Sick numbers, I wonder if that car/driver will give Lucy a run for her money.

[CoolRex]

that is the fastest subaru i have ever been in on the street (i only drove lucy on track)... 1st is useless at wot, it spins all 4 at the top of 2nd and keeps them spinning when you blip the throttle (no clutch on the dog-box) and snap 3rd. It's fantastic. And that was only at 23 psi of boost.

I've advised bart that if he runs that at full boost on the cheap street tires he's got on there now, he'll die ;)

siegel



yikes!

[siegelracing]

Head/cam work? I'm guessing Cosworth heads and cams?

Sick numbers, I wonder if that car/driver will give Lucy a run for her money.

Yep, the Cossie heads and cams.

It outweighs Lucy by over 400 lbs, can't quite fit the rubber we run, and doesn't have quite the level of aero we do, but none of those items are really that hard to fix, and it's still probably one of the fastest cars around...

Siegel

[pankopp]

my mouth is watering.... this is awesome.

[Mike@KillShot Performance]

Very nice work guys! I am sure he is a happy camper. So what did it make on pump gas?

[Doug@TopSpeed]

Made 491 @ 19psi... I am sure it could have broke 500 on pump but this car will never run on pump anyway.

[slowwrx]

LOL...I had Bart as a student at Roebling...very nice guy

Scott you should see if he wants to come to the school on the 20th

[JDM-STI]

I'm jealous!!!

[flat4ever666]

could we get an estimate on the cost of this build?

[nsvwrx]

im guessing 22k?

[dontcallitarex]

Thats like my dream subie.

Wow. That rules.

What kind of wheels are on it in the picture?

[Ben@KillShot Performance]

Thats awesome! Bad ass lookin car too...

[BC2003UGA]

wow, didn't hear the exact numbers yesterday. That is insane. It's a great looking car in person too.

[Doug@TopSpeed]

could we get an estimate on the cost of this build?


Considering the motor and tranny alone cost 26k its going to be alot. There are cheaper ways to get this power, but if you wanted the exact same setup I would say you need a car plus 35k.

[flat4ever666]

^^^can anyone direct me to a good credit union?

[Ben@KillShot Performance]

id love to see pics of the engine!!

[FACE]

WOW nice work there! Huge numbers...and not just the Dyno sheet ;)

[BKiller]

Hey, $40K for a car that will smoke just about anything on the street is a great deal. Think of all the fun you could have picking on Z06's and Porsches.

[Galimore]

That thing is a beast! If he's taking it out for a run you've got to make a post about it - I want to see it in action! :)

[Mad Mallard]

what kind of chassis upgrades would be a good idea to safely handle this power? Say for mostly drag racing?

[siegelracing]

what kind of chassis upgrades would be a good idea to safely handle this power? Say for mostly drag racing?

For drag racing, nothing... it's just going straight... maybe bushings to help with deflection on the launch...

For road racing - EVERYTHING and big sticky slicks :D

Siegel

[AirMax95]

Cosworths top dog crate storker motor complete longblock... $16k is the price of addmission though

Shiat!!!! At that admission price I will never enjoy the themepark ride!

Congrats to the owner, and happy driving!